12” CHAMELEON HEAT TRANSFER VINYL
SEE PRICE CHART FOR PRICE BREAKS. MIX AND MATCH COLORS
GET COMPLETE BUNDLES HERE
12” WIDE-CUT TO LENGTH
THESE ARE SOLD IN 1 FOOT (12 INCH) INCREMENTS.
1=1 FOOT
2=2 FEET
3=3 FEET
SELECTING SHEET WILL GET YOU 12"X12" SHEETS
SELECTING ROLL WILL GET YOU 12"X # SELECTED IN A CONTINUOUS ROLL
TeckWrap Chameleon Heat Transfer Vinyl for T-Shirts
- Use this decorative heat transfer film with your creativity to quickly and easily personalize apparel fashion accessories.
- Iron-on vinyl ideal for DIY T-shirts, team or club wear, bags, aprons, pillowcases home decor with DIY unique images.
- Work great on clean dry smooth flat cotton fabrics surface
How to Do It
- 1.Compatible with Craft Cutters, Die Cutters, Sign Plotters,etc.
- 2.Mirror/Reverse your image design.
- 3.Place vinyl (gloss side) onto cutting mat .
- 4.Adjust proper blade speed and cutting pressure .
- 5.Weed all of the excess slowly, leave the delicate design letters or graphics.
- 6.Make sure the finished product facing the right way once ironed onto your fabric.
- 7.Lay out the fabric. Place the t-shirt or fabric on a hard, flat clean dry surface.
- 8.Place a cardboard to protect transferred image onto both sides of t-shirt.
- 9.Set a heat press machine from 150℃(302℉) to 160℃(320℉) .
- 10.Press it only for 8-12 seconds at medium pressure.
- 11.Iron on the vinyl gloss side. Do not use steam iron.
- 12.Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image.
- 13.Wait for the vinyl to COOL and gently peel off backing after few minutes.