RESIN ROCKERS UV RESIN SKIM COAT
RESIN ROCKERS UV RESIN SKIM COAT
Couldn't load pickup availability
9oz bottle
*This resin is meant to be used in extremely thin coats on items such as pens.
It is not meant to be used to dome, create jewelry, or coat acrylic blanks. You will want Resin Rockers Original UV Resin for those projects:)
Resin Rockers Skim Coat is the first UV Resin geared towards full coverage, quick coating for pen making, and other items such as scissor handles, badge clippers, handheld tools, and more! It has a self-leveling property that works just like epoxy and is built for paper thin coats. It is perfect for glittering your projects!
FULL COVERAGE WITHOUT THE PAINT! As long as you are using a full coverage glitter, you will not need to paint your pens prior to glittering. Just sand, resin, glitter, and resin! DONE!
PLEASE READ: Your safety is our #1 priority so it is important you follow all precautions. This goes with any brand of UV Resin. Resin Rockers UV Resin Skim Coat is a quick cure, medium viscosity coating resin, and adhesive chemical. Everyone reacts differently to everything, so it’s important to wear nitrile gloves, a respirator mask, and appropriate clothing to protect your skin, in addition to working in a well-ventilated area.
- Age recommendation for use is 15+
- Wear nitrile gloves to protect the skin in case of an allergy. We sell finger cots, but please note they are latex.
- Wear a mask if you have respiratory sensitivity. All brands of UV Resin can let off fumes when it first starts to cure. It is the chemical reaction that occurs when the UV light penetrates the resin itself. We always recommend safety precautions with any chemical product.
Uses
Very Thin Coats Done in Layers & Glazing
Great for layering thin coats with a gloved finger (Finger Cot) or thin silicone brush or paint brush. If coating pens, this formula is more viscous, allowing you to coat quicker and more even.
Repair & Adhesion
Adhere phone grip or badge reel blanks, rhinestones or pearls to your pieces (great to bling up your pens)
Sealing, and Protection
Finish custom pens or other pieces that require a thin coat while providing maximum UV protection to prevent yellowing over time
*Pro Tip: If adhering UV resin to a piece that was coated with epoxy first, sand lightly with 1200+ grit sandpaper and wipe clean with rubbing alcohol and a lint-free cloth
How to Coat with UV Resin Skim Coat:
Gloved Finger
Prep piece as directed and make sure it is clean. Using a gloved finger, squeeze a small amount directly onto the piece you would like to skim coat. In the same direction, run your gloved finger along the piece until an even coat is achieved. Add glitter or vinyl if you choose. Allow the resin to self-level and then cure under the lamp for 60-180 seconds. Repeat until you reach desired look.
If cured correctly, the end result of Resin Rockers UV Resin Skim Coat is smooth, rock-solid, NON-TACKY and gorgeous!
Active Ingredients: Acrylic UV Resin
Check out our Instructions and FAQs to learn more!
Questions? Need help? Our support team will respond within 24 hours: help@resinrockers.com
Customer Reviews

